Buyer's Reference

HVAC Takeoff Software

November 2026By Vini P.K.
hvac-duct-takeoff-plan

Short Answer

HVAC takeoff software counts and measures the heating, ventilation and air conditioning (HVAC) scope on a set of drawings: ductwork, fittings, air devices, dampers, equipment, piping and insulation. A good HVAC takeoff turns that scope into quantities with sizes and gauges, then into material and labor. Most of the time it saves is in the ductwork, where every run, fitting and size change has to be counted.

Measured in
Linear feet, pounds of sheet metal and counts
Gauge set by
Duct size and pressure class
Feeds
The material order and the labor
AI turnaround
A priced MTO (material takeoff) in under 3 hours

Buyer's Reference · HVAC Takeoff

What Goes Into an HVAC Takeoff

The main parts of an HVAC scope, how each is taken off, and what usually gets missed.

ItemHow It Is Taken OffOften Missed
Rectangular and round ductLength by size, then pounds of sheet metal by gaugeSize changes along a run
FittingsEach elbow, tee, transition and offset by sizeOffsets drawn as a single line
Air devicesDiffusers, grilles and registers by type and sizeDevices shown only on the reflected ceiling plan
DampersFire, smoke and volume dampers, eachFire dampers at every rated wall
EquipmentAir handlers, fans and variable air volume (VAV) boxes from the schedulesCurbs, supports and connections
Insulation and sealingSquare feet of duct wrap or liner, plus sealantSections that switch from liner to wrap

Fire and smoke dampers are often shown on the life safety plans, so check those sheets as well as the mechanical plans.

What Is HVAC Takeoff Software?

An HVAC takeoff is the count of everything in the mechanical scope. HVAC quantity takeoff software replaces the highlighter and scale with a tool that counts and measures on the drawing, so the estimator spends less time on the duct and more time on the price.

What is a takeoff in HVAC, exactly? It is the list of quantities the estimate is built from, and crews are priced on the same fittings and footage, so a miss in the takeoff becomes a miss in both material and labor.

What to Check Before You Choose HVAC Takeoff Software

Takeoff software for HVAC contractors should cover these basics:

  • Every quantity links back to where it sits on the drawing
  • Labor comes out alongside material, by fitting and footage
  • Material and labor are priced at your rates
  • Revisions and addenda can be re-run without starting over
  • Mechanical piping on the same set is covered too

For more on the duct itself, see the takeoff software for mechanical contractors entry and the guide to ductwork takeoff software.

HVAC Takeoff vs HVAC Estimating

HVAC TakeoffHVAC Estimating
AnswersHow much is thereWhat it costs to buy and install
OutputQuantities by size, gauge and typeMaterial, labor, markup and the bid
Done byThe estimator or takeoff softwareThe estimator, with pricing data

Most mechanical contractors need both halves. The guide to HVAC estimating software covers the pricing side.

How The Takeoff AI Handles HVAC

As AI HVAC takeoff software, The Takeoff AI is built on models trained on industrial, mechanical and HVAC drawings. It measures duct length, counts fittings, gaskets, bolts and welds, takes off the piping on the same set, and prices the material takeoff (MTO) and labor takeoff (LTO) into a priced bill of materials (BOM) at your own rates. It also builds a 3D model from the 2D drawings, so you can see the duct routing before you price it.

It is trained on more than 1 million drawing sets, runs at 95% accuracy, and highlights every quantity on the sheet it came from. 113 estimators say The Takeoff AI is the best HVAC takeoff software they have used, and it helps them estimate projects in 3 to 4 hours that once took 40 to 50 hours. See it on the mechanical and HVAC page.

Before You Ask

Frequently Asked Questions

Short answers on HVAC takeoff and the software behind it.

What is HVAC takeoff software?

Software that counts and measures duct, fittings, air devices, dampers, equipment and piping on mechanical drawings.

What is a takeoff in HVAC?

The list of quantities the HVAC estimate is built from, such as feet of duct by size, pounds of sheet metal and counts of fittings and devices.

How long does an HVAC takeoff take with AI?

The Takeoff AI returns a priced material takeoff in under 3 hours.

What gets missed most in HVAC takeoffs?

Fittings at size changes and offsets, fire dampers at rated walls, and equipment supports and connections.

Does The Takeoff AI do HVAC takeoff?

Yes. It measures the duct, counts fittings, gaskets, bolts and welds, and prices material and labor into a priced BOM.

Ready when the drawings land

Price your bid before your competitors open the package.

Book a Demo