AI Estimodeling Software for Your 2D Industrial Drawings
The Takeoff AI is 3D takeoff software that reads industrial piping and structural steel drawings and generates the 3D model from them. You see the job in three dimensions, check every quantity against the sheet it came from, and price it without anyone building a model first.
The Only AI That Runs Estimodeling From 2D Industrial Drawings
The Takeoff AI converts your 2D industrial drawings to 3D, counts every member and fitting off them, and prices the job against your own rate book.
Estimodeling With The Takeoff AI
Estimodeling means building a 3D model so you can pull quantities and labor hours out of it. Someone has to build that model first, so a detailer spends days on it or you send the package out and wait.
The Takeoff AI interprets the drawings you already have, takes off the quantities, and generates the model in the same pass.
| Estimodeling today | The Takeoff AI |
|---|---|
| A detailer builds the model first | The model comes out of the drawings |
| Days of modeling before the first number | Quantities and model in the same pass |
| The model is built for the bid, then thrown away | The model is a byproduct, at no extra time |
| Quantities live inside the modeling software | Every quantity links back to its sheet |
AI Estimodeling Built for the Drawings You Bid From
The Takeoff AI reads the drawings you actually receive, scans included, and gives back the material takeoff and the 3D model together, with every line traceable to its sheet.
Process Piping
Generates the 3D model and the estimate from isometrics and piping and instrumentation diagrams. It follows every line through its fittings, valves and welds, and carries pipe class and schedule through.
See It Run on Your PackageSave 70% of Estimation Time
The Takeoff AI extracts quantities, derives hardware, prices material off your rate book, and estimates labor hours against MCAA-seeded units with your own factors on top.
Every number traces back to the iso it came from.
Your bid data stays private.
TheTakeoff AI is built for sensitive bid packages, with access controls, encryption, and audit trails so your team can work fast and securely.
Frequently asked questions
No. That is the point of the page. The Takeoff AI works from the PDF package you already have, including scans and marked-up sheets. If you do have a native model or an export, it will use that first, because it is the highest confidence source available.
It reaches the same outcome and gets there the opposite way. Estimodeling has a detailer build the model so the quantities can be extracted from it. The Takeoff AI extracts the quantities from the drawings and produces the model alongside them, so nobody spends the days of modeling first.
Industrial piping, including isometrics and piping and instrumentation diagrams, and structural and miscellaneous steel. Other trades are not covered today.
No, and it is not meant to be. It is built for estimating and review, so you can see the job, sanity check the quantities and find what the drawings left ambiguous. Fabrication models stay with your detailer.
Every line carries a confidence score and links back to the sheet it came from, and anything uncertain is flagged for review rather than absorbed into the total. You check the numbers that matter instead of taking a percentage on faith.
They stay yours, inside access controls with an audit trail. Nothing is shared outside your team.