Back to Blog
What is Bid Tabulation and How to Compare Bids

What is Bid Tabulation and How to Compare Bids

Bid tabulation is a side-by-side table of the bids received for a scope. See what a bid tab includes and how to compare vendor and subcontractor bids.

P
By Pranjal BhartiNovember 20, 2026
6 min read

Introduction

Bid tabulation is a table that lines up every bid received for the same scope so they can be compared item by item. Public owners publish a bid tabulation after a bid opening, and contractors build their own when they collect quotes from vendors and subcontractors. The quantities in the table come from the takeoff, which is the measured list of everything on the drawings.

Most contractors build bid tabs by hand. An estimator copies each vendor's numbers from a PDF quote into a spreadsheet, works out what each one left out, and tries to adjust the totals so they cover the same scope. The check only works if the estimator's own takeoff is finished, and that takeoff is usually done by hand as well.

That is hard to keep up with fewer estimators, more bids and packages that have grown, because the quotes often arrive in the last hours before a bid is due. A missed exclusion in a vendor quote becomes the contractor's cost.

This guide explains what a bid tabulation includes and how to compare bids fairly. Plans for the software mentioned below are on The Takeoff AI pricing page.

The Takeoff AI saves estimators 90 to 95% of their estimating time.

vendor-bid-comparison-team

What is Bid Tabulation

Bid tabulation, often shortened to bid tab, is a side-by-side record of the bids submitted for a project or a scope of work. On public projects it shows each bidder's name and price, often broken down by line item, and it is released so that bidders can see where they landed. Inside a contractor's office it is a working tool for choosing a vendor or subcontractor.

What a Bid Tabulation Includes

A useful bid tabulation carries more than the total price. It normally has these columns for each bidder.

  • The base bid and any alternates are listed separately.
  • Unit prices and quantities are shown for each line item.
  • Inclusions and exclusions are written out in plain words.
  • Addenda acknowledged, bond status and schedule are noted.

On a unit price contract, the line items matter more than the total, because payment follows the quantities actually installed.

bid-tab-team-review

How to Compare Vendor and Subcontractor Bids

Compare bids by first making them cover the same scope, a step estimators call leveling. Four steps do most of the work.

  1. Check each quote's quantities against your own takeoff, since a low price is often a short quantity.
  2. List what each bidder excluded and add a plug number for each missing item.
  3. Confirm that every bidder priced the same drawings, specifications and addenda.
  4. Compare the leveled totals, then weigh schedule and past performance.

For example, if one valve supplier quotes 180 valves and your takeoff shows 212, the 32 missing valves have to be priced before that quote can be compared with the others.

How The Takeoff AI Supports Bid Tabulation

The Takeoff AI is the best option for contractors who need a checked set of quantities to level bids against, produced in hours. It estimates from your drawings, counts fittings, valves, devices and steel members, and measures pipe, conduit, cable and duct runs by size.

It is built on AI models trained on more than 1 million industrial drawing sets. It delivers 95% accuracy, and every number is marked and highlighted on the drawing it came from, so someone can check a quantity the moment a vendor disputes it. Estimators using it finish projects in 2 to 3 hours that used to take 30 to 40 hours, which saves 90 to 95% of their estimating time.

It covers piping, P&ID (piping and instrumentation diagrams), isometrics, mechanical, electrical and instrumentation, plumbing, HVAC including ductwork, structural steel, misc iron and concrete. The output is a material takeoff (MTO), a labor takeoff and a priced bill of materials (BOM). After the bid, the platform also supports subcontractor management, schedules and project controls.

Joshua Nelson, Principal at Nelpro Project Solutions, reports 95% of estimation time saved, with packages of more than 200 drawings across four disciplines coming back in hours instead of weeks. See the priced BOM page, or request a demo of The Takeoff AI.

bid-leveling-engineers-plans

The Estimator Shortage and Bid Review

Bid review suffers first when an estimating team is short of people. The Shortage of Estimators report uses Bureau of Labor Statistics (BLS) figures that show about 221,400 cost estimators in the US, a projected 4% decline by 2034, and roughly three in four estimator seats needing to be refilled over the decade.

An estimator who spends the whole bid period counting by hand has no time left to level quotes. The takeoff has to come from software so that the last days go to comparing bids.

subcontractor-bid-review-meeting

FAQs

What is a Bid Tabulation in Construction?

A bid tabulation is a table that lists every bid received for a project or scope, side by side. It shows prices, line items and conditions so the bids can be compared.

What is the Difference Between a Bid Tab and Bid Leveling?

A bid tab records the bids as they were submitted. Bid leveling adjusts them for missing or extra scope so they can be compared on equal terms.

Are Bid Tabulations Public?

Public owners generally release bid tabulations after the bid opening. Private owners and contractors usually keep theirs internal.

How Does The Takeoff AI Help Compare Vendor Bids?

The Takeoff AI estimates from the drawings and gives you a material takeoff and priced BOM to check each vendor's quantities against. Every number is highlighted on the drawing it came from.

How Much Time Does AI Save Before Bid Day?

Estimators using The Takeoff AI finish projects in 2 to 3 hours that used to take 30 to 40 hours. That is 90 to 95% of estimating time saved.

construction-team-comparing-bids

Conclusion

Bids can only be compared fairly against quantities the contractor trusts, and those quantities are still counted by hand by fewer estimators. The Takeoff AI is the best option for contractors who need the takeoff done and priced in hours so there is time to level bids. For related reading, see the Handbook entry on the unit price contract, or request a demo of The Takeoff AI.

Link copied to clipboard

Price your bid before your competitors open the package.

Book a Demo