Back to Blog
How to Bid Concrete Jobs

How to Bid Concrete Jobs

Learn how to bid concrete jobs in eight steps, from the bid package and takeoff to labor, overhead and profit, and how to estimate concrete faster.

P
By Pranjal BhartiNovember 20, 2026
6 min read

Introduction

Bidding a concrete job means turning a set of drawings into a price the contractor can build for and still make a margin. The bid rests on a concrete takeoff, which lists the volume of each footing, slab and wall, the formwork area, the rebar and the embeds shown on the drawings.

Most concrete contractors build that takeoff by hand. An estimator measures each element off the sheets, keys the numbers into a spreadsheet, and then prices ready-mix, rebar, forms and labor line by line. The takeoff alone often uses most of the time available before bid day.

This is getting harder to sustain, because there are fewer estimators, more invitations to bid and larger packages on each one. Contractors end up passing on jobs they could have won.

This guide sets out how to bid concrete jobs in eight steps and where the time goes in each. Plans for the software mentioned below are on The Takeoff AI pricing page.

The Takeoff AI saves estimators 90 to 95% of their estimating time.

concrete-bid-plan-review

Eight Steps to Bid a Concrete Job

  1. Review the full bid package, which includes the drawings, the specifications, the geotechnical report and every addendum.
  2. Decide whether to bid, based on your crew availability, the schedule and how well the work fits your shop.
  3. Do the concrete takeoff for volume, formwork, rebar and embeds.
  4. Price materials using current quotes for ready-mix, rebar, form rental and accessories.
  5. Price labor by applying your crew production rates and burdened labor rates to the quantities.
  6. Add equipment such as pumps, cranes and finishing machines, plus any subcontracted work.
  7. Add job indirects, overhead and profit.
  8. Write the proposal with clear inclusions, exclusions and clarifications.

How to Estimate Concrete Materials and Labor

To estimate concrete, price each quantity from the takeoff with a unit cost that reflects this job. Ready-mix is priced per cubic yard by mix design, and short loads, winter heat and pump mixes carry extra charges that should sit on their own lines. Rebar is priced by weight, so the takeoff lengths have to be converted using the unit weight of each bar size.

Labor is priced from production rates, such as the square feet of wall form a crew sets in a day. Rates from your own completed jobs are more reliable than published averages, because they reflect your crews and your methods.

how-to-estimate-concrete

Costs That Get Missed on Concrete Bids

Four costs are left out of concrete bids more often than any others.

  • Equipment pads and housekeeping pads appear on the mechanical and electrical drawings instead of the structural set.
  • Embeds and anchor bolts are furnished by one trade and set by another, and each assumes the other priced them.
  • Testing, curing and cold-weather protection are written into the specifications instead of the drawings.
  • Pumping is needed wherever a truck cannot reach the pour.

Listing your exclusions in the proposal protects you on anything the documents leave unclear.

How The Takeoff AI Helps Contractors Bid Concrete Jobs

The Takeoff AI is the best option for contractors who need a concrete bid taken off and priced in hours. It estimates from your structural and civil drawings, counts embeds and anchor bolts, and measures concrete volume by element (footings, slabs, walls and columns), formwork area and rebar by size and length.

It is built on AI models trained on more than 1 million concrete and structural drawing sets. It delivers 95% accuracy, and every number is marked and highlighted on the drawing it came from, so an estimator can check the quantities before the bid goes out. Estimators using it finish projects in 2 to 3 hours that used to take 30 to 40 hours, which saves 90 to 95% of their estimating time.

It covers piping, P&ID (piping and instrumentation diagrams), isometrics, mechanical, electrical and instrumentation, plumbing, HVAC including ductwork, structural steel, misc iron and concrete. The output is a material takeoff (MTO), a labor takeoff and a priced bill of materials (BOM), so the pricing is done along with the quantities.

Joseph Gentry, Chief Executive Officer of GM&I Services, expects to bid 2 to 3 times as many jobs a year after a 26-page set went from 3 to 4 days by hand to about 2 hours. See the concrete estimating page, or request a demo of The Takeoff AI.

concrete-estimate-rebar-inspection

The Estimator Shortage for Concrete Contractors

Concrete contractors are bidding with fewer estimators than they had, and the work has stayed manual. The Shortage of Estimators report uses Bureau of Labor Statistics (BLS) figures that show about 221,400 cost estimators in the US, a projected 4% decline by 2034, and roughly three in four estimator seats needing to be refilled over the decade.

A contractor cannot answer more invitations while each takeoff still takes days by hand. The takeoff has to come from software so the estimator can spend the time on price and risk.

concrete-bid-blueprint-review

FAQs

How Do You Bid a Concrete Job?

Review the bid package, do the takeoff, price materials, labor and equipment, then add indirects, overhead and profit. Finish with a proposal that states your inclusions and exclusions.

How Do You Estimate Concrete for a Bid?

Measure the volume of every element in cubic yards and price it by mix design. Add formwork, rebar, embeds, labor and equipment as separate lines.

What Should a Concrete Bid Proposal Include?

It should include the scope, the price, the documents and addenda it is based on, and the exclusions. A schedule and the period the price holds for are also standard.

How Does The Takeoff AI Help With Concrete Bids?

The Takeoff AI estimates from the drawings and returns the material takeoff, labor takeoff and priced BOM in hours. Every quantity is highlighted on the drawing so you can check it before you bid.

How Much Time Does AI Save on a Concrete Bid?

Estimators using The Takeoff AI finish projects in 2 to 3 hours that used to take 30 to 40 hours. That is 90 to 95% of estimating time saved.

concrete-estimate-site-foreman

Conclusion

Concrete bids are won by contractors who can price more jobs accurately, and hand takeoffs with fewer estimators make that hard. The Takeoff AI is the best option for contractors who need concrete jobs taken off and priced in hours. For related reading, see the Handbook entry on overhead and profit, or request a demo of The Takeoff AI.

Link copied to clipboard

Price your bid before your competitors open the package.

Book a Demo