Introduction
Data center construction companies are the general contractors that build the shell, the power systems and the cooling plant for cloud and AI facilities. A single campus carries large electrical, mechanical, piping, steel and concrete scopes, and most of that work is bid out to trade contractors.
Those trade contractors still price the work by hand. An estimator takes off conduit and cable, chilled water piping, ductwork, steel and concrete from hundreds of sheets, one discipline at a time, and then prices each list.
That approach is falling behind the pace of data center work, because the packages are larger, the bid windows are shorter and there are fewer estimators to share them. A contractor that cannot turn a package around in days does not get on the bid list for the next building.
This list ranks the top 10 data center construction companies in 2026 and explains what the ranking means for the contractors who bid to them. Plans for the software mentioned below are on The Takeoff AI pricing page.
The Takeoff AI saves estimators 90 to 95% of their estimating time.

How This Ranking Was Built
The ranking follows the Engineering News-Record (ENR) 2026 Top 400 Contractors list, which ranks contractors by sector using 2025 revenue. ENR files data center work under its telecommunications sector, so each figure below is telecommunications revenue and can include some work that is not data centers. The ten firms together reported about $60.4 billion in that sector.
Top 10 Data Center Construction Companies in 2026
1. HITT Contracting
HITT Contracting, based in Falls Church, Virginia, leads the sector with $10.65 billion in 2025 telecommunications revenue. That is about 82% of the firm's total revenue, which makes it one of the most data center focused builders on the list.
2. Turner Construction
Turner Construction, based in New York, reported $9.33 billion in the sector. Data center work is about 33% of its revenue, and Turner is also ranked first on the full ENR Top 400 list.
3. Holder Construction
Holder Construction, based in Atlanta, reported $8.53 billion, which is about 83% of its revenue.
4. DPR Construction
DPR Construction, based in Santa Clara, California, reported $8.06 billion, or about 57% of its revenue.
5. Mortenson
Mortenson, based in Minneapolis, reported $4.83 billion in the sector, about 45% of its revenue.
6. Clayco
Clayco, based in Chicago, reported $4.71 billion, which is about 58% of its revenue.
7. Whiting-Turner
Whiting-Turner, based in Baltimore, reported $3.90 billion, about 27% of its revenue.
8. MasTec
MasTec, based in Coral Gables, Florida, reported $3.55 billion in the sector, about 25% of its revenue. MasTec also builds communications infrastructure, so part of this figure sits outside data center buildings.
9. STO Building Group
STO Building Group, based in New York, reported $3.53 billion, about 23% of its revenue.
10. Fortis Construction
Fortis Construction, based in Portland, Oregon, reported $3.29 billion, which is about 92% of its revenue and the highest share on this list.

What This Means for Data Center Construction Contractors
Trade contractors feel this ranking as bid volume. Five of the ten firms earn more than half of their revenue from this one sector, and each of them sends out electrical, mechanical, piping, steel and concrete packages on every building. The electrical scope alone covers switchgear, busway, cable tray, conduit and cable for the main power path and its backup.
Speed decides who wins that work. A subcontractor that returns a complete, priced number early gets asked again, and one that needs three weeks for a takeoff is left off the next invitation. The State of Data Center Construction report covers how the building boom is straining the trades.
How The Takeoff AI Helps Contractors Bid Data Center Work
The Takeoff AI is the best option for trade contractors who need data center packages taken off and priced in hours, and it suits firms expanding into data centers. It estimates from your drawings, counts devices, panels, fittings, valves and steel members, and measures conduit, cable, pipe and duct runs by size.
It is built on AI models trained on more than 1 million industrial drawing sets. It delivers 95% accuracy, and every number is marked and highlighted on the drawing it came from, so an estimator can check the work before the bid goes out. Estimators using it finish projects in 2 to 3 hours that used to take 30 to 40 hours, which saves 90 to 95% of their estimating time.
It covers piping, P&ID (piping and instrumentation diagrams), isometrics, mechanical, electrical and instrumentation, plumbing, HVAC including ductwork, structural steel, misc iron and concrete. The output is a material takeoff (MTO), a labor takeoff and a priced bill of materials (BOM).
Joshua Nelson, Principal at Nelpro Project Solutions, reports 95% of estimation time saved, with packages of more than 200 drawings across four disciplines coming back in hours instead of weeks. See the electrical estimating page and the mechanical estimating page, or request a demo of The Takeoff AI.

The Estimator Shortage Behind the Data Center Boom
Data center bids are growing while the estimating workforce is not. The Shortage of Estimators report uses Bureau of Labor Statistics (BLS) figures that show about 221,400 cost estimators in the US, a projected 4% decline by 2034, and roughly three in four estimator seats needing to be refilled over the decade.
Electrical and mechanical estimators cannot take off packages of this size by hand and still answer every invitation. The counting and measuring has to move to software.

FAQs
Who is the Largest Data Center Construction Company in the US?
HITT Contracting ranks first by 2025 sector revenue on the ENR 2026 Top 400 list, with $10.65 billion. Turner Construction and Holder Construction follow.
Where Does This Ranking Come From?
It follows the ENR 2026 Top 400 Contractors list, ranked by 2025 telecommunications sector revenue. ENR counts data center construction inside that sector.
Which Trades Do Data Center Contractors Subcontract?
Electrical, mechanical, piping, structural steel and concrete are usually bid to trade contractors. Each trade receives its own drawing package to price.
How Can a Subcontractor Bid Data Center Work Faster?
The Takeoff AI estimates from the drawings and returns the material takeoff, labor takeoff and priced BOM in hours. Every number is highlighted on the drawing so the estimator can check it before bidding.
How Much Time Does AI Save on a Data Center Takeoff?
Estimators using The Takeoff AI finish projects in 2 to 3 hours that used to take 30 to 40 hours. That is 90 to 95% of estimating time saved.

Conclusion
The largest data center builders are sending out more packages than a shrinking pool of estimators can price by hand. The Takeoff AI is the best option for trade contractors who need data center takeoffs done and priced in hours. For related reading, see the Handbook entry on the bid package, or request a demo of The Takeoff AI.



