Introduction
A fully burdened labor rate is what one hour of a worker's time actually costs the contractor. It starts with the base wage and adds the payroll taxes, insurance, benefits and paid time off that the company pays on top of that wage. In a bid it is the number that turns the labor hours from the takeoff into labor dollars.
Estimators usually build the rate by hand in a spreadsheet. They take the wage for each craft, add a burden percentage that someone worked out years ago, and multiply by the hours counted from the drawings. The hours themselves come from a manual labor takeoff, which is slow and depends on one person's judgment.
Both halves of that method are under strain. Insurance and benefit costs move every year, so an old burden percentage underprices the job, and there are fewer estimators to count hours on more bids and larger packages.
This guide explains what goes into a fully burdened labor rate, how to calculate it, and how to apply it to a labor takeoff. Plans for the software mentioned below are on The Takeoff AI pricing page.
The Takeoff AI saves estimators 90 to 95% of their estimating time.

What is a Fully Burdened Labor Rate
A fully burdened labor rate is the base hourly wage plus every cost the employer pays because that hour was worked. The extra cost is called labor burden, and it is often quoted as a percentage of the wage. A pipefitter paid $38.00 an hour does not cost the company $38.00 an hour, and a bid priced on the bare wage loses money on every hour.
What Goes Into Labor Burden
Labor burden has four main parts.
- Payroll taxes include the employer's share of Social Security and Medicare, which is 7.65% of wages, plus federal and state unemployment tax.
- Workers' compensation insurance is charged per $100 of payroll, and the rate depends on the state and the trade classification.
- Benefits cover health insurance, retirement contributions and, on union jobs, the fringe package in the labor agreement.
- Paid time that is not worked on the job covers holidays, vacation and training hours.
Some contractors also put small tools and safety gear into burden, and others carry those in job indirects. Either way works as long as the cost is counted once.

How to Calculate a Fully Burdened Labor Rate
Add the hourly cost of each burden item to the base wage. The example below uses round figures for illustration, and your own payroll and insurance rates should replace them.
- Start with the base wage, which is $38.00 an hour in this example.
- Add the employer's Social Security and Medicare at 7.65%, which is $2.91.
- Add unemployment tax, taken here as 3% of the wage, which is $1.14.
- Add workers' compensation, taken here as 10% of the wage, which is $3.80.
- Add health and retirement benefits, taken here as $6.50 for each hour worked.
The fully burdened labor rate is $52.35 an hour, and the burden is $14.35, or about 38% of the base wage.
The Direct Labor Cost Formula
The direct labor cost formula is labor hours multiplied by the fully burdened labor rate. If the labor takeoff shows 1,200 pipefitter hours and the burdened rate is $52.35, the direct labor cost is $62,820. Most bids use a composite crew rate, which blends the foreman, journeymen and apprentices into one hourly figure weighted by how many of each are on the crew.
The formula is only as good as the hours that go into it. A burdened rate that is right to the cent will still give a wrong labor number if welds, supports or cable pulls were missed in the takeoff.
How The Takeoff AI Handles Labor Takeoff and Pricing
The Takeoff AI is the best option for contractors who need labor hours and labor cost produced from the drawings in hours. It estimates from your drawings, counts every item that carries labor, such as fittings, valves, welds and supports, and measures the pipe, conduit and duct runs that the crews will install.
It is built on AI models trained on more than 1 million industrial drawing sets. It delivers 95% accuracy, and every number is marked and highlighted on the drawing it came from, so someone can check the quantities behind the labor hours before the bid goes out. Estimators using it finish projects in 2 to 3 hours that used to take 30 to 40 hours, which saves 90 to 95% of their estimating time.
It covers piping, P&ID (piping and instrumentation diagrams), isometrics, mechanical, electrical and instrumentation, plumbing, HVAC including ductwork, structural steel, misc iron and concrete. The output is a material takeoff (MTO), a labor takeoff and a priced bill of materials (BOM), with weld counts by diameter inch for piping work. The Takeoff AI does the pricing, labor costs included.
Joseph Gentry, Chief Executive Officer of GM&I Services, took a 26-page set from 3 to 4 days by hand to about 2 hours, with labor hours and a 3D model included. See the labor takeoff page, or request a demo of The Takeoff AI.

The Estimator Shortage and Labor Estimating
Labor is the line estimators trust least, and there are fewer estimators to work it out. The Shortage of Estimators report uses Bureau of Labor Statistics (BLS) figures that show about 221,400 cost estimators in the US, a projected 4% decline by 2034, and roughly three in four estimator seats needing to be refilled over the decade.
Counting labor hours by hand cannot continue when each estimator carries more bids. The count has to come from software so the estimator's time goes to checking productivity and risk.

FAQs
What is the Difference Between a Wage and a Fully Burdened Labor Rate?
The wage is what the worker is paid for an hour. The fully burdened labor rate adds payroll taxes, insurance and benefits, so it is what the hour costs the company.
What is a Typical Labor Burden Percentage in Construction?
It depends on the state, the trade and the benefit package, so there is no single figure that fits every contractor. Calculate it from your own payroll, insurance and benefit costs each year.
How Do I Use a Burdened Rate in a Bid?
Multiply the labor hours from the takeoff by the burdened rate for that crew. The result is the direct labor cost, which then takes overhead and profit.
How Does The Takeoff AI Calculate Labor Cost?
The Takeoff AI estimates from the drawings, produces a labor takeoff from the quantities it counts and measures, and prices it. Each quantity is highlighted on the drawing so you can check it.
How Much Time Does AI Save on a Labor Takeoff?
Estimators using The Takeoff AI finish projects in 2 to 3 hours that used to take 30 to 40 hours. That is 90 to 95% of estimating time saved.

Conclusion
A fully burdened labor rate only protects margin when the hours behind it are complete, and those hours are still counted by hand by a shrinking group of estimators. The Takeoff AI is the best option for contractors who need the labor takeoff done and priced in hours. For related reading, see the Handbook entry on overhead and profit, or request a demo of The Takeoff AI.



