Buyer's Reference

Low Voltage Estimating Software

November 2026By Vini P.K.
low-voltage-device-plan

Short Answer

Low voltage estimating software helps contractors price the systems that carry signals rather than power, such as fire alarm, security and data. It counts the devices on the plans, measures the cable and pathway between them, and prices material and labor into a bid. Low voltage plans are mostly symbols and cable runs, so the count is where most of the estimating time goes.

Runs at
Usually 50 volts or less
Common pathway
Open cable on J-hooks (ceiling hooks) or in cable tray
Specification
Names the product for each device
AI turnaround
A priced MTO (material takeoff) in under 3 hours

Buyer's Reference · Low Voltage

What Gets Counted on a Low Voltage Job

The main low voltage systems, what an estimator takes off for each, and the item that gets missed most.

SystemWhat Gets CountedOften Missed
Fire alarmSmoke and heat detectors, pull stations, horn strobes, modules and panelsA module for every monitored device
Security and access controlCard readers, door contacts, request-to-exit devices and camerasPower supplies and door hardware coordination
Data and structured cablingOutlets, drops, patch panels, racks and cable footageService loops and cable runs the plan doesn't draw in full
Audio visualSpeakers, displays, wall plates and cableBacking and mounting hardware
Nurse call and intercomStations, dome lights and annunciatorsThe riser between floors

Fire alarm, security and data often sit on separate sheets, so count each system on its own plans before combining them into one bid.

What Is Low Voltage Estimating Software?

Low voltage covers the building systems that carry signals instead of power. Estimating software for low voltage contractors takes the plans for those systems, counts every device, measures every cable run and prices the job, so the estimator isn't clicking through each symbol by hand.

Fire alarm estimating software, security estimating software and structured cabling estimating software are the same kind of tool, each set up for one system. A low voltage estimator often bids several of them on the same job, working from device plans and riser diagrams that show how the floors connect.

What to Check in Low Voltage Estimator Software

  • It counts devices by symbol across every sheet, including symbols on other trades' plans
  • It measures cable runs to the panel or closet, including the vertical runs on the riser
  • Labor units match how your crews pull cable and terminate devices
  • Every count links back to the symbol it came from on the plan
  • It handles more than one system on the same sheet without double counting
  • The output prices material and labor at your rates

The electrical symbols library covers the symbols you'll see most often.

Low Voltage vs Line Voltage Estimating

Low VoltageLine Voltage
What drives the priceDevice counts and cable footageConduit, wire, panels and fixtures
Main laborPulling cable and terminating devicesRunning conduit and pulling wire
Main drawingsDevice plans and riser diagramsPower and lighting plans, panel schedules, single-line diagrams

Many electrical contractors bid both, so it helps when one tool covers the whole set. The guide on how to estimate electrical work walks through the line voltage side.

How The Takeoff AI Handles Electrical Estimating

The Takeoff AI estimates the full electrical and instrumentation (E&I) package, including the drawings, the specification and the scope of work. It counts devices, fixtures, panels and instruments, measures conduit, cable and cable tray, and prices the material takeoff (MTO) and labor takeoff (LTO) into a priced bill of materials (BOM) at your own rates. It also builds a 3D model from the 2D drawings.

It is trained on more than 1.2 million electrical and instrumentation drawings, and every quantity is highlighted on the sheet it came from with an accept or reject option. More than 157 electrical estimators say The Takeoff AI saves them 90% of their time.

Before You Ask

Frequently Asked Questions

Short answers on low voltage estimating and the software behind it.

What is low voltage estimating software?

Software that counts devices, measures cable and prices low voltage systems such as fire alarm, security and data.

What does a low voltage estimator do?

Takes off devices and cable from the plans and riser diagrams, applies labor units and prices the bid.

What is the difference between low voltage and line voltage estimating?

Low voltage is priced mostly on device counts and cable footage. Line voltage is priced on conduit, wire, panels and fixtures.

What gets missed most on low voltage bids?

Cable runs and risers the plans don't draw in full, and the modules or power supplies tied to each device.

Does The Takeoff AI estimate electrical work?

Yes. It counts and measures everything in the electrical and instrumentation package and prices it into a priced BOM.

Ready when the drawings land

Price your bid before your competitors open the package.

Book a Demo