What Is a Steel H Beam?
H beams have wide flanges of near-constant thickness, which makes them strong in both directions and suited to columns, piles and heavy framing. Steel H beams carry the columns of pipe racks and process structures, equipment supports and transfer beams, while the lighter I-shaped wide flanges carry floors and roofs.
Structural steel shapes in the US follow ASTM A6, and wide flange beam sizes run from about 4 inches to more than 40 inches deep. W beam sizes are listed by nominal depth and weight, as in the chart above. When a shape's flange width is close to its depth, such as a W8x31 or W14x90, it is what most people call an H beam, and W shape beam is the term on most US drawings.
H Beam vs I Beam
| H Beam | I Beam | |
|---|---|---|
| Flange width | Close to the depth | Narrow compared with the depth |
| Flange thickness | Constant | Tapered on S shapes (American Standard beams) |
| Best at | Columns and loads in both directions | Beams spanning in one direction |
| US designation | Wide W shapes, or HP shapes for piles | S shapes, or narrow W shapes |
The difference between an I beam and an H beam matters on a takeoff, because the profile changes the weight per foot at the same depth, and so the tonnage. An H pile is the bearing pile version, rolled as an HP shape with the flange and web the same thickness, and H pile sizes run from HP8 to HP18.
How to Calculate Steel H Beam Weight
Weight (lb) = weight per foot (lb/ft) × length (ft) · Tons = lb ÷ 2,000
The weight per foot is the second number in the shape name, so most of the takeoff work is getting the lengths right. Steel H beam weight in tons is what the mill order, the shop and the galvanizer all price from.
Worked Example: Twelve W12x26 Beams
- Each beam is 24 feet long, so one beam weighs 26 × 24 = 624 lb
- Twelve beams weigh 624 × 12 = 7,488 lb
- 7,488 ÷ 2,000 = 3.74 tons
- Add connection material such as clip angles, plates and bolts, which is often figured as a percentage of the beam weight
Common Mistakes on an H Beam Takeoff
- Measuring to grid lines instead of the member's real length between connections
- Looking up weight from the nominal depth instead of the full shape name
- Leaving out connection material and miscellaneous steel
- Missing columns that show only on elevations and sections
- Pricing mill lengths without allowing for drops and waste
How The Takeoff AI Handles Structural Steel
The Takeoff AI estimates the structural drawings, the specification and the scope of work, and takes off the steel end to end. It counts every member by shape and length, every plate and connection, works out the weight, and prices the material takeoff (MTO) and labor takeoff (LTO) into a priced bill of materials (BOM), including galvanizing and hot-dip galvanizing, at your own rates.
Its nesting fits cuts onto stock lengths to cut material waste, and it builds a 3D model from the 2D drawings. It is trained on more than 1 million drawing sets and runs at 95% accuracy. 113 estimators say The Takeoff AI is the best structural steel estimating software they have used, and it helps them estimate projects in 3 to 4 hours that once took 40 to 50 hours. See it on the structural steel page.